Latest Academic Works
Cold sintering of lead-free ferroelectric perovskites
Fabrication of electroceramics usually requires high sintering temperatures of 800 to 1400 °C, which can unintentionally lead to problems such as volatilization of species, formation of secondary phases and excessive grain growth. These problems can cause inhomogeneous microstructures, non-stoichiometric chemical compositions and limited material functionality. Therefore, there is a need …
Piezoelectric polymer films made of polyl-lactic acid for biomedical use
In the field of biomedical materials, conventional approaches to tissue engineering and wound healing face limitations that encourage the exploration of innovative treatments. This work presents multifaceted exploration of piezoelectric polylactic acid (PLA) films intended for biomedical applications, from the optimization of the conditions for efficient film preparation to the …
Defect chemistry and hardening of ferroelectric cobalt-doped bismuth ferrite ceramics: doctoral thesis
Bismuth ferrite, BiFeO3 (BFO), has been recognized as a promising lead-free material for high-temperature piezoelectric applications due to its high Curie temperature of 825 °C. However, the practical use of BFO has been limited in particular by its elevated electrical conductivity. In addition, BFO shows the characteristics of ferroelectric hardening, …
Effect of coupling between external factors and building materials' properties on living conditions deterioration in low-energy buildings
Buildings are complex systems as external factors are linked to, and have an effect on the characteristics of a building. In this dissertation, the focus is on the connection between external factors and the building’s characteristics, which have an impact on the living conditions, durability and energy efficiency of a …
Radio wave propagation in special environments
In this doctoral thesis, radio signal propagation in special environments is discussed. The primary focus is on the development of a path loss model for radio signal propagation in long road tunnels and underground passageways, which allows a rather precise calculation of radio signal path loss and, consequently, a quick …
Na0.5Bi0.5TiO3-based materials with mechanical-stress-dependent dielectric properties
The stress dependence of the electrical permittivity offers a convenient way of measuring pressure. This effect is suitable for static and quasi-static stress applications, where the conventional method based on the piezoelectric effect becomes inadequate. Although the principle of applying this effect for pressure sensing has been known for almost …