REPOSITORY > RESULTS

Bismuth ferrite, BiFeO3 (BFO), has been recognized as a promising lead-free material for high-temperature piezoelectric applications due to its high Curie temperature of 825 °C. However, the practical use of BFO has been limited in particular by its elevated electrical conductivity. In addition, BFO shows the characteristics of ferroelectric hardening, …

This doctoral thesis describes the synthesis and characterization of calcium phosphate (CaP) coatings on zirconia ceramics. The main application of coated zirconia is in medicine, particularly in the area of dental bone implants. Due to the favourable biological characteristics of CaP, it can be expected that the application of CaP …

Nuclear fusion offers a prospect of a safe, economical and environmentally friendly source of energy. For the advanced concepts of nuclear fusion, SiC-based fibre reinforced composites were proposed as a structural material for the first wall of the reactor vessel, enabling higher operating temperatures and efficiencies. Already developed techniques for …

Sodium niobate (NaNbO3) is the end member of several alkaline niobate-based solid solutions, which represent an important group of environment-friendly lead-free piezoceramics. Even though alkaline niobates are of considerable technological importance, problems in obtaining high densities and a fine-grained microstructure are still reported and not much is known about the …

Dielectric materials, used to control and store charges and electric energy, play a key role in modern electronics and electric power systems. Dielectric spectroscopy is a versatile method, well-suited for detection, separation and characterization of various contributions to dielectric response of advanced ceramic and polymeric materials, as it enables understanding …

This work presents experimental studies of ordering phenomena, electromechanical and electrocaloric properties in single crystal, ceramic and solid solution relaxor ferroelectrics and single crystal ferroelectric materials. The main aim of investigations is to prove the existence of a liquid-vapor critical point in these systems and to verify its impact on …

The aging of bone tissue, bone defects that form during the removal of cysts, tumours, genetic defects and other bone‐tissue‐related diseases, together with demands for a better quality of life, mean a requirement for materials, artificial or autogenous, that will have a long functionality and survivability under the body’s environmental …

The KNN solid solution was prepared from pre-synthesized binary compounds of, sodium and potassium niobate in a 1/1 molar ratio. The KNG sintering aid was prepared by homogenizing the pre-reacted binary mixtures of alkaline reagents and germanium oxide with the Na/Ge = 1/1 and K/Ge = 1/1 molar ratios. The …

This doctoral thesis describes the preparation of moderately porous Y-TZP ceramics with improved flexural strength. The main field of application is dentistry, where the elastic mismatch between the Y-TZP material and tooth substance influences the survival rate of fixed partial dentures (FPDs). By introducing porosity into the bulk samples a …

KTaO3 belongs to the group of incipient ferroelectrics, which are materials important from the fundamental, as well as from the applications, point of view. It is well known in its single-crystal form; however, the processing of technologically interesting ceramics and thin films is a challenging task and knowledge of their …