REPOSITORY > RESULTS

Doctoral dissertation

Bioactive glass-based composite scaffolds for tissue engineering applications

Author(s): Ana Gantar (Author), Saša Novak (Supervisor)

Thesis defense date: 24.08.2016

Organization: MPŠ - Mednarodna podiplomska šola Jožefa Stefana

PID: 20.500.12556/ReVIS-15033

Views: 3 | Downloads: 0

Abstract

Tissue engineering is based on three components used for tissue formation or regeneration: scaffolds, stimulating molecules/materials and cells. With large tissue defects, scaffolds are crucial as they serve as (temporary) extracellular matrix, encapsulating cells and guiding them to form a new tissue. In bone regeneration, bone-stimulating scaffolds with suitable properties are preferred.
In this study, nano-sized bioactive glass particles (BAG), a highly bioactive material, were used with an aim to prepare a three-dimensional scaffold, with an ability to form bone mineral, even in vitro. The design of the scaffold should mimic the cancellous bone in its porosity, mechanical properties and degradation rate. Despite favorable bioactivity of the bioactive glass, it has a downside, as other inorganic bioactive materials, of being slightly alkaline when degrading, and highly brittle when in the form of a porous 3D scaffold.
Therefore, we have combined BAG particles with two different polymers and prepared a) a porous 3D scaffold, available “off the shelf” and b) a hydrogel for injectable applications. For the 3D scaffold, gellan gum (GG), a natural polysaccharide obtained during fermentation of *Sphingomonas paucimobilis*, and for the hydrogel, thiolated polyethylene glycol (PEG-SH)₄, a synthetic polymer with self-healing abilities, were used. Both are degradable, however bioinert, but suitable to be designed into a temporary 3D matrix.
Using the freeze-drying technique, anisotropic highly porous structures of GG-BAG were obtained. The structures were obtained from prepared cross-linked hydrogels, to which two chemically different bioactive glass powders were added: BAG-A (SiO₂-CaO) or BAG-B (SiO₂-CaO-Na₂O-P₂O₅), to study the effect of BAG chemistry on the composite’s properties. In the freeze-dried scaffolds containing BAG-B, increased pore size was observed, resulting in insufficient increase of Young’s modulus and higher rate of degradation. Due to the unfavorable characteristics, it was concluded to use only BAG-A in further studies.
GG-BAG-A exhibited favorable pore size, consequently favorable scaffold properties. The pore size depended also on the freezing temperature and percentage of added BAG. The most promising porosity and other scaffold characteristics were determined with the GG-50A scaffold. With increasing percentage of BAG, the porosity decreased to values not suitable for cell encapsulation. Despite the modification of the preparation process, decreased Young’s modulus was exhibited.
Secondly, we prepared a composite scaffold in the form of an injectable hydrogel. The Au-(PEG-SH)₄-BAG system is suitable for minimally invasive applications, as it gels in situ due to dynamic cross-linking via aurophilic attractions. The addition of BAG particles positively affected the viscoelasticity of the hydrogel and increased the hydrogel’s bioactivity.
Both presented composites were bioactive and the alkalinity of BAG was decreased with a lower diffusion rate of Ca²⁺ ions through the polymer matrix, resulting in improved biocompatibility (lower cytotoxicity). The BAG addition to the polymer matrices resulted in more favorable mechanical properties. The degradation rate of the Au-(PEG-SH)₄-BAG system was unfortunately too fast, however, with the GG-BAG composites, the degradation rate was estimated to be a few months. Further, it was established that the bioactivity of the BAG particles substituted the lost weight during degradation by the formation of a hydroxyapatite phase (the bone mineral).
With the combination of materials, the characteristics of each component in the composite, the bioactive glass and the polymer, were improved.

Attachments

Cite this work