REPOSITORY > RESULTS

Doctoral dissertation

Chemical and structural aspects of ilmenite to rutile/hematite transformation

Author(s): Nadežda Stanković (Author), Nina Daneu (Supervisor), Aleksander Rečnik (Co-Supervisor)

Thesis defense date: 26.02.2016

Organization: MPŠ - Mednarodna podiplomska šola Jožefa Stefana

PID: 20.500.12556/ReVIS-15059

Views: 2 | Downloads: 0

Abstract

In nature, minerals are often exposed to significant changes in physical and geochemical conditions that lead to the formation of structural intergrowths through the topotaxial reactions. During progressive recrystallization, the precursor mineral is transformed into more stable phases. The topic of the thesis is a topotaxial transformation of ilmenite to hematite and rutile where oriented transformation is possible since all three minerals (ilmenite, rutile and hematite) have a common oxygen sublattice which is controlling the orientation relationship between these minerals. The topotaxial transformation was studied on two groups of samples; first are the rutile and hematite intergrowths from Mwinilunga, Zambia; the second part of the thesis is discussing the transformation of ilmenite single crystal from Zagi Mountain, Pakistan to rutile and hematite during oxidation in air.
In the thesis I studied mechanisms of ilmenite transformation to rutile and hematite at the atomic-scale. For investigating structural transformation during topotaxial transformations I used X-ray powder diffraction, optical microscopy, scanning and transmission electron microscopy. For complete image of structural transformation, the samples were observed in two perpendicular zone axes.
In the samples investigated in the thesis I observed two different orientation relationships. The crystallographic orientation relationship between rutile and hematite in samples from Zambia is determined to be <101> {010}R || <210>∙{001}H (OR-2). On the other hand, ilmenite samples heated in air show different orientation relationship described by <001>{010}R || <210>∙{001}I (OR-1). The mechanism of transformation includes initial oxidation of Fe2+ in ilmenite to Fe3+ and its diffusion to the surface that triggers exsolution of Ti ions within the parent ilmenite structure to form rutile lamellae. The diffusion of iron is controlled by the activity of oxygen. When the oxygen is readily available for the oxidation of Fe2+ to Fe3+, diffusion is fast; on the other hand if activity of oxygen is low, the oxidation of iron is slow. The kinetics of diffusion controls the orientation relationship. The OR-1 is formed when the diffusion is fast since the Ti cations completely inherit the ilmenite oxygen sublattice. However when the diffusion is slow, the cations have enough time to adopt energetically most favourable positions and to form tetragonally deformed rutile structure.
Different orientation relationship between rutile and hematite/ilmenite also leads to different rutile-rutile interfaces. In the case of OR-2, these could be classified into four classes: (1) symmetry-related configuration at 60° and 120°, (2) {101}R twins with incidence angles of 114.44° and their complementaries at 65.56°, (3) {301}R twins at 54.44° with complementaries at 125.56° and (4) low-angle tilt boundaries at 174.44° and 5.56°. On the other hand, OR-1 leads only to symmetry-related rutile-rutile contacts at 60° and 120°.

Attachments

Cite this work