REPOSITORY > RESULTS

Doctoral dissertation

Elastic relaxation and incipient plasticity at vicinal surfaces of copper and nickel studied by molecular statics and dynamics simulations

Author(s): Nuša Pukšič (Author), Monika Jenko (Supervisor), Matjaž Godec (Co-Supervisor)

Thesis defense date: 24.05.2017

Organization: MPŠ - Mednarodna podiplomska šola Jožefa Stefana

PID: 20.500.12556/ReVIS-15000

Views: 0 | Downloads: 0

Abstract

While a lot is known about the deformation of metallic surfaces from experiments, elasticity
theory and simulations, this investigation represents the first molecular-dynamics-based
simulation of uniaxial deformation for the vicinal surfaces of copper and nickel. These
vicinal surfaces are composed of terraces divided by equidistant, mono-atomic steps. The
periodicity of vicinals makes them good candidates for a study of the influences of surface
steps on surface dynamics.
To minimize the surface energy, atoms in the near-surface region are displaced and in
the cases of vicinal surfaces form complex displacement fields spanning multiple layers into
the bulk. The displacement fields in turn lead to elastic fields in the near-surface region that
are material-dependent and specific for each surface orientation with alternating regions
of compressive and tensile strains. The influence of the displacements of the near-surface
atoms on the deformation mechanisms of vicinal surfaces was investigated by uniaxial
deformation of two sets of surfaces: (1 1 19) vicinal to (001), and (9 9 11) and (10 10 8),
both vicinal to (111). In addition to having different terrace orientations, steps also have
distinct microfacets. The (1 1 19) surface has (111) oriented step microfacets, while the (9
9 11) surface has (001) oriented microfacets, also called A-step, and the (10 10 8) surface
has (111) oriented microfacets, also called B-step.
In the cases of the (1 1 19) surfaces, deformation mechanisms are dependent on the
material as well as the strain polarity. Most notably, bulk dislocation nucleation sites exist
in nickel, but not in copper.
In the cases of the investigated surfaces vicinal to (111), copper and nickel have analogous
deformation mechanisms, while deformation mechanisms vary with respect to the
surface orientation and polarity of strain.
We conclude that the displacement fields of vicinal surfaces play a role in the deformation
mechanisms of vicinal surfaces.
The material-dependent positioning and activity of the nucleation sites are particularly
noticeable in the cases of the (1 1 19) surfaces, where dislocations nucleate at the surface
steps in copper, while in nickel dislocations form in the bulk in tensile deformation and in
the bulk as well as at the steps in compressive deformation.
The influence of the polarity of the strain is noticeable in all the cases through the
yield-stress asymmetry exhibited by both materials. In multiple cases it is additionally
emphasized by the difference in the deformation mechanisms, of which the most glaring
example are the (10 10 8) surfaces, that only deform by the parallel stacking faults aligned
with the steps in compressive deformation, but not in tensile deformation.
The deformation mechanisms are very much dependent on the inclination of the strain
axis as is evidenced by the comparison of the deformation mechanisms of the three vicinal
surfaces. For instance, we have observed twinning in the deformation of (1 1 19) surfaces,
but not in the other cases. In addition, as was expected from the values of their stackingfault
energies, transitions of the deformation mechanisms from dislocation emission to
stacking-fault nucleation to twinning occur at smaller strains in copper than in nickel.

Attachments

Cite this work