Views: 2 | Downloads: 0
Recently, iron-oxide magnetic nanoparticles have been intensively studied, especially in relation to their possible applications in biomedicine. The transfer of basic knowledge gathered in this research to many practical applications in different technologies will induce the need for the synthesis of large quantities of these nanoparticles. It is expected that large quantities of stable aqueous suspensions of iron-oxide nanoparticles will soon be required in technologies related to a magnetic separation, for instance, in wastewater treatment, for the elimination of unwanted micro-organisms or toxins from beverages, or as the starting materials for the synthesis of different magnetically retractable nanocomposites. These nanocomposites will combine the magnetic nanoparticles with other functional materials ((photo)catalytic nanoparticles, enzymes, etc.).
One of the possible options for controlling the surface properties of the iron-oxide nanoparticles and for the preparation of their stable suspensions is the adsorption of amino acids onto their surfaces. In theory, a large number of amino acids would enable a change of the surface properties, such as the surface charge or the availability of specific functional groups, across a broad range.
Following this, the primary task of my thesis was the preparation of stable aqueous suspensions of iron-oxide nanoparticles using the absorption of two different amino acids, i.e., aspartic acid and lysine, onto their surfaces. The maghemite (γ-Fe2O3) nanoparticles were synthesized using the co-precipitation of Fe2+/Fe3+ ions with ammonia from aqueous solutions. The adsorption of the amino acids enabled the preparation of the stable aqueous suspensions. However, characterization of the surface properties of the nanoparticles in the suspensions showed properties (zeta potential, hydrodynamic size) that cannot be explained based on basic adsorption mechanisms known from the literature. In the relevant scientific literature the adsorption of amino acids is explained based on molecular single layers. To explain the properties of the suspensions, the absorption of both amino acids onto maghemite nanoparticles was systematically studied. Direct HPLC analyses of amino acids in the supernatants of the suspensions and at the nanoparticles’ surfaces showed that the amino acids absorb onto the iron-oxide nanoparticles in the form of large molecular associates. Osmolality measurements based on freezing-point depression measurements confirmed that both the amino acids form molecular associates already in the aqueous solutions. The adsorption of the amino acids in the form of molecular associates decisively influences the properties of the formed suspensions. The layer of associated molecules at the nanoparticle surfaces is relatively unstable, pH dependent and can desorb in the presence of other charged molecules. I tried to improve the stability of the surface layer with cross-linking of the adsorbed amino acids. The cross-linking was achieved with the activation of carboxyl groups using carbodiimide (EDC) and their reaction with the amino groups.
As an alternative to the adsorption of the amino acid onto pre-synthesized nanoparticles, stable aqueous suspensions can be prepared by the precipitation of the iron-oxide nanoparticles in the presence of the amino acid. In this case, the amino acid strongly influences the nanoparticles’ formation mechanism. The aspartic acid forms coordinative compounds with the Fe3+ ions and thus changes the course of their precipitation.