Views: 2 | Downloads: 0
The increasing use of pharmaceuticals and personal care products (PPCPs) is leading to their widespread occurrence in the environment. An important, yet poorly investigated class of PPCPs are the benzophenone-derived compounds. Although their concentrations in the environment are at trace levels, they are sufficient to induce toxic effects on ecosystems because of chronic exposure. Nevertheless, data regarding their occurrence, cycling and adverse effects in the environment are scarce and their presence in natural waters remains unregulated. The aim of this thesis was to provide information on the occurrence, fate and toxicity of eight benzophenone derivatives in the aquatic environment, which include the pharmaceutical ketoprofen, its phototransformation products 3-ethylbenzophenone and 3-acetylbenzophenone, and five benzophenone-type UV filters (benzophenone, 4-hydroxybenzophenone, 2-hydroxy-4-methoxybenzophenone, 2,4-dihydroxybenzophenone and 2,2'-dihydroxy-4-methoxybenzophenone).
The thesis describes an analytical procedure for determining the selected benzophenone derivatives in surface waters and sediments. The method involves the pre-concentration of water samples by solid phase extraction (SPE) and microwave assisted extraction (MAE) of sediment samples, followed by derivatization and analysis by gas chromatography–mass spectrometry (GC-MS). Different parameters were investigated to achieve optimal method performance. In terms of SPE, the effects of sample volume and pH, elution solvent, and matrix effects were evaluated, using the hydrophilic–lipophilic balanced copolymer as the SPE sorbent (Oasis HLB). The results revealed that sample volume and the type of matrix have no significant influence on the performance of SPE. An acidic pH (pH = 2–3) resulted in equal or higher extraction yields of the investigated compounds. Ethyl acetate (1.8 mL) was chosen as the elution solvent. Overall extraction efficiencies of 91% to 96% were achieved. For sediment extraction, the effect of extraction solvent, temperature, irradiation time and microwave power on MAE yield were investigated. An extraction time of 30 min at 150 °C with the power of 800 W yielded optimal extraction efficiencies of 80% to 99%, where the solvent mixture of methanol and acetone (1:1, v/v) with the addition of 5% (w/w) formic acid was used.
Before the GC-MS analysis of benzophenones, the derivatization process was optimized, where different types and amounts of derivatizing agent, solvents, reaction times and temperatures were studied. Benzophenone, 3-ethylbenzophenone and 3-acetylbenzophenone were derivatized by forming pentafluorobenzyloximes using 300 μL PFBHA in methanol at 60 °C. 3-acetylbenzophenone showed complete derivatization after 1 h, while benzophenone and 3-ethylbenzophenone required further 14 h. The hydroxylated benzophenones were dissolved in 300 μL of ethyl acetate and derivatized by silylation using 30 μL MSTFA (1 h at 60 °C). Derivatized compounds were analyzed by GC-MS with the overall achieved limits of detection of 0.1–1.9 ng L⁻¹ for water samples and 0.1–1.4 ng g⁻¹ for sediment samples.
The developed method was applied to the analysis of environmental water and sediment samples from Slovenia and Croatia, affected either by recreational activities or by wastewater treatment plant (WWTP) discharges. Ketoprofen (≤ 2900 ng L⁻¹) and its transformation products (≤ 320 ng L⁻¹) were found in only two rivers (Ljubljanica and Kamniška Bistrica), both receiving WWTP effluents, while UV filters were detected in all 14 surface water samples. The most frequently detected compounds were benzophenone and 2-hydroxy-4-methoxybenzophenone, two of the most commonly used UV filters. They were also the most abundant (≤ 190 ng L⁻¹ for benzophenone and ≤ 820 ng L⁻¹ for 2-hydroxy-4-methoxybenzophenone). Results showed that WWTP effluents are an important source of ketoprofen, while sunscreen products washed off during bathing contribute significantly to UV filter contamination of surface waters. Importantly, quantifiable amounts of the two ketoprofen transformation products 3-ethylbenzophenone (≤ 320 ng L⁻¹) and 3-acetylbenzophenone (≤ 19 ng L⁻¹) in the aqueous environment are reported for the first time. Ketoprofen and its transformation products were not detected in the sediment samples. Benzophenone levels in sediments were ≤ 820 ng g⁻¹, while concentrations of other compounds were lower (≤ 32 ng g⁻¹). Similar to surface waters, the most frequently detected compounds in sediments were benzophenone and 2-hydroxy-4-methoxybenzophenone. When sediment and water samples are compared, the target compounds favor the aqueous phase, which is in agreement with their physico-chemical properties.
Photostability of benzophenones was investigated by laboratory-scale photodegradation experiments using a medium pressure (MP) UV lamp, which revealed that the degradation of benzophenones follows pseudo-first-order kinetics. Ketoprofen was the most photolabile (t₁/₂ = 0.8 min), while UV filters were more stable with t₁/₂ between 17 h and 99 h. Irradiation by natural sunlight revealed a similar photostability as predicted under laboratory conditions. Solar photodegradation experiments in distilled water, lake and seawater revealed that the presence of photosensitizers in natural waters significantly affects photodegradation of benzophenones, indicating they also have the potential to undergo direct and indirect photolysis. The exception is ketoprofen, which showed no difference in lake and seawater compared to distilled water (t₁/₂ = 26–28 min), implying direct photodegradation is the dominant elimination process. Other compounds revealed different photolysis rates in natural waters. In lake water, accelerated photodecomposition of benzophenones occurred, which may be attributed to higher levels of nitrate, a known photosensitizer. In contrast, seawater affected photodegradation to different extents, depending on the compound. Due to the presence of several potential photosensitizers in seawater, it was impossible to determine which one is responsible for enhancement or inhibition of photodegradation. Environmental half-lives of 3-ethylbenzophenone and 3-acetylbenzophenone were 10.5–15.4 h and 11.0–95.0 d, respectively, while t₁/₂ values of UV filters were between 3.22 d and 43.3 d. Further, it was shown that the transformation products of ketoprofen, 3-ethylbenzophenone and 3-acetylbenzophenone are actually formed in the environment by exposure of ketoprofen to natural sunlight.
Genotoxicity testing of benzophenone derivatives using the SOS/umuC assay on Salmonella typhimurium revealed that ketoprofen and its transformation products showed no genotoxic activity, in neither the presence nor absence of a metabolic activation system. UV filters, with the exception of 2,2'-dihydroxy-4-methoxybenzophenone, exhibited weak genotoxic activity in the presence of a metabolic activation system; however, the concentrations tested were much higher than those found in the environment (≥ 125 μg mL⁻¹). The present study addressed genotoxicity of 3-ethylbenzophenone and 3-acetylbenzophenone for the first time. In addition, this is the first report of genotoxicity assessment of benzophenones photodegradation mixtures, produced by MP/UV irradiation. The results revealed that only benzophenone exhibited weak genotoxic activity when exposed to MP/UV irradiation, while other photodegradation mixtures were not genotoxic.