REPOSITORY > RESULTS

Doctoral dissertation

Preparation and properties of spectrally selective, electrochromic and photocatalytic coatings from dispersions of nanoparticles

Author(s): Mohor Mihelčič (Author), Boris Orel (Supervisor)

Thesis defense date: 16.12.2015

Organization: MPŠ - Mednarodna podiplomska šola Jožefa Stefana

PID: 20.500.12556/ReVIS-15063

Views: 0 | Downloads: 0

Abstract

Within the scope of this thesis, various topics were studied related to harnessing solar energy, i.e., thickness sensitive spectrally selective (TSSS) coatings for solar absorbers, thin optically transparent electrochromic coatings prepared from pigment dispersions and photocatalytic coatings. The key problem common to all the studied systems was to prepare pigment particle dispersion enabling deposition of functional optical coatings exhibiting low haze (no scattering of visible light), high hiding power, fast and strong electrochromic effect and photocatalytic and super-hydrophilic properties. Black manganese spinel oxide (PK 3060), nickel oxide (Ni1-xO) and titanium dioxide (TiO2) pigments were used for making TSSS, electrochromic and photocatalytic coatings. Polyhedral oligomeric silsesquioxanes (POSS) served as material of choice because of their organic–inorganic nature and a combination of hydrophobic and hydrophilic properties.
The rheological properties of PK 3060 pigment modified with differently functionalized (isobutyl, isooctyl and phenyl) trisilanol POSS dispersants were first studied. The rheological studies revealed that trisilanol POSS molecules acted as super dispersants, enabling the preparation of pigment dispersions with pigment loadings (pigment to volume concentration ratio, PVC) that were higher than the PVC values obtained with ordinary organic pigment coatings, confirming their “super dispersant” properties. The results provided a suitable platform for making TSSS pigment coatings with appropriately high pigment loadings, which were essential in order to make solar coatings with high covering efficiency and high solar absorptance, i.e., spectral selectivity (aS/eT ratio).
Sol-gel based TSSS pigment coatings for solar absorbers were next studied. Pigment dispersions were made of black manganese spinel oxide (PK 3060) pigment, which was surface modified with isobutyl trisilanol POSS dispersant. Pigment dispersions were prepared by a two-step process; first, the pigment particles were equilibrated in trisilanol POSS mixture in order to make the pigment surface hydrophobic, then dried and, in the final step, dispersed by milling with zirconia beads. Sol-gel based TSSS pigment coatings were made by adding 3-glycidoxypropyltrimethoxy silane (Glymo) binder to the corresponding pigment dispersion. Before the application of spectrally selective coatings on an industrial coil coating line, the thickness and spectral selectivity was optimized for coatings deposited on a smaller scale by the spin coating process. The spectral selectivity of coatings deposited via coil coating exhibit aS = 0.90 and eT = 0.12.
The fact that the sol-gel based coatings decomposed to silica at higher temperatures (560-600 °C) was exploited for the preparation of high power (HIPO) solar absorber coatings with improved spectral selectivity. Thermal degradation was studied with the aid of isoconversion kinetics and the degradation products were correlated with infrared spectra measurements, providing clear evidence of the formation of a silica network with embedded PK 3060 particles. The sol-gel TSSS pigment coatings exhibit exceptional high temperature (400 °C) and long-term (1216 h) stability, stemming from their inorganic (silica) nature. The spectral selectivity of HIPO coatings did not change significantly; eT rose only by 3%, while as values remained practically unchanged.
Further investigations of the dispersant effect of trisilanol POSS dispersant were performed for TiO2 pigment particles, which served for the deposition of electrochromic coatings. The interaction between TiO2 (anatase and rutile made from metatitanic acid, mTiA and mTiR) and trisilanol POSS was characterized by infrared spectroscopy, TEM, XRD, TG and EDAX measurements combined with electrochemical and electrochromic measurements. The results confirmed the successful surface modification of TiO2 particles, which we concluded from their good optical properties: haze was low (below 6%), transmittance of the pigment coatings in the visible range was above 80%, which dropped in the coloured state (ΔT = Tbleached - Tcoloured = 55.7%, λ = 634 nm). The neutral colour EC foil based device was constructed from Ni1-xO and TiO2 thin films, glued together with gel electrolyte.
For electrochromic coatings, pigment particle dispersions of electrochromic Ni1-xO pigment were used and dispersed in an aqueous suspension of nickel oxyhydroxide (NiOxHy) compound, serving in this case for surface modification of the Ni1-xO. Pigment suspensions were used for the deposition of electrochromic coatings at low temperatures (150 °C, 30 minutes) on FTO and also on flexible conducting polymeric ITO-PET foils. The electrochromic properties of the corresponding Ni1-xO pigment coatings were tested in lithium and lithium-free electrolytes. We demonstrated that the coatings change colours from transparent to dark brown when charged in a liquid lithium based and, importantly, also in a lithium-free electrolyte (i.e., TBA+ triflate/PC). This was taken as proof that only electrons enter the Ni-O semiconducting particles, not that the inserted lithium ions are needed to stabilize the Ni+3 states in the coloured (oxidized) Ni1-xO layer. For demonstration of the application potential of the ensuing coatings, flexible EC devices were constructed; either PEDOT (self-standing) or WO3 on one side and Ni1-xO pigment coating on conductive FTO glass or flexible ITO-PET substrates on the other side. They were glued together with semi-solid electrolyte containing or not lithium ions.
The final part of the thesis was devoted to investigation of the surface modification of TiO2 P25 through the photocatalytic (PCA) and photosuperhydrophilic (PSH) properties of coatings. Fabrication of the corresponding coatings was a major challenge because most of the dispersants negatively affected the photocatalytic effect. It was shown that both NiOxHy and titanium isopropoxide (TiP) sol-gel precursor acted as efficient dispersants for making homogeneous and stable pigment TiO2 dispersions, which were suitable for the deposition of optically transparent TiO2 coatings with low haze (2%) and high PCA and PSH effects. Importantly, the PCA and PSH effects were stronger than those of commercial Pilkington ActivTM Glass.
Finally, modification of cotton fibres was performed by deposition of coatings made of titanium isopropoxide (TiP) and titanium isopropoxide/(3-aminopropyl)triethoxysilane (TiP/APTES) organic-inorganic hybrids. Despite the apparent differences in size and type of these two organic-inorganic hybrid dispersants with respect to trisilanol POSS and pigment particles, interactions between cotton surface and TiP and TiP/APTES hybrids were also studied with IR spectroscopy. The IR ATR technique was applied, subtraction spectra were constructed and interactive sites on cellulose molecules with the hybrids were identified from the measured IR ATR spectra. The main purpose of this work was to provide information about the distinguishable long-term washing stability of coatings and their prolonged antibacterial effects, which we attributed to the formation of the substrate-C-O/-Si- O- bonding.

Attachments

Cite this work