Views: 4 | Downloads: 0
The research in the field of lead-free piezoelectric ceramics in the past two decades has attracted a lot of attention to the materials based on K0.5Na0.5NbO3 (KNN). However, the processing of these materials proved to be difficult, with the unstable outcome of the solid-state synthesis from the point of view of microstructure and phase composition as well as difficult sintering. Despite these generally known issues, relatively few studies actually treat the KNN solid-state synthesis to gain better control over the reproducibility of the synthesis.
One of the methods to improve the sintering of KNN is doping with alkaline earth metals, out of which, doping with strontium (Sr) brought the best densities and most significantly improved the piezoelectric response of the KNN. This thesis therefore addresses the main problems with KNN – the solid-state synthesis reproducibility as well as more detailed research of the material, which was designed to improve the KNN’s functional properties.
In the first part, the KNN solid-state synthesis of alkaline carbonates with Nb2O5 in its orthorhombic or monoclinic form was studied. The X-ray diffraction and electron microscopy techniques showed, that the choice of the particular Nb2O5 influences the course of the reaction, the homogeneity of the resulting (KxNa1-x)NbO3 solid solution and finally the sintering behaviour and microstructure of KNN. The Nb2O5 reagent is therefore defined as an important factor that significantly influences the reproducibility of the KNN solid-state synthesis.
In the second part, the effect of the Sr dopant on the solid-state synthesis of KNN is studied by thermal analysis and in-situ high-temperature X-ray diffraction. Sr was not found to have a significant influence on the course of the solid-state synthesis. On the other hand, the particle size distribution of the Nb2O5 reagent proved to be a crucial factor influencing the temperature interval of the KNN solid-state synthesis.
And finally, in the third part of this work, the influence of the Sr dopant on the KNN’s crystal structure and microstructure is described. The combination of the extended X-ray absorption fine-structure analysis and X-ray diffraction techniques with Rietveld refinement, Raman spectroscopy and electron microscopy techniques, brings the following results: the local structure around the Sr atom is determined to be cubic perovskite and Sr is confirmed to substitute the A-site of the perovskite lattice. Sr was confirmed to be homogenously distributed in the KNN. The investigations in the highly doped samples on the atomic level suggest that the system tends to segregate the A-site vacancies in a secondary phase in order to release the chemical pressure. Together with an increasing lattice disorder and microstrain, these effects are correlated with the increasing number of low-angle grain boundaries, which finally limit the grain growth and then lead to a significant grain size decrease.