Latest Academic Works
Heterogeneous recombination of neutral oxygen atoms on the surfaces of oxidized materials
In this dissertation, we studied heterogeneous surface recombination of neutral oxygen atoms. We described plasma as a reliable source of neutral oxygen atoms and the behavior of neutral atoms in low-pressure plasma sustained by high-frequency discharges. Neutral atom density in the flowing afterglow and the recombination coefficient on several surfaces …
Characteristics of gaseous plasma in a large low-pressure reactor
The scientific backgrounds of technologies involved in the production of headlamps for the automotive industry are elaborated in this thesis. The experimental work was performed using an industrial plasma reactor with a volume of approximately 5 m3. The reactor enables three different operations, i.e., plasma pretreatment of workpieces made from …
Optimization of coupling between high-frequency generator and low pressure plasma
In this thesis we present the development of the device for the removal of carbon deposits in fusion reactors. Amorphous hydrogenated carbon deposits (a-C:H) represent a major problem for smooth operation of future fusion reactors with divertors containing carbon tiles, because they cause retention of radioactive tritium. There are techniques …
Superhydrophility of plasma treated materials
In this doctoral thesis, we present the superhydrophilic effect on surfaces of three different materials, i.e. highly oriented pyrolytic graphite, graphite foil and graphite grain in polymer composite. In order to induce this complicated effect on the surface we used reactive oxygen plasma treatment. The plasma was created in glass …
Development of new anti-bioadhesive surfaces for specific neurodegenerative agents
The research work presented in this thesis considers the development of new biocompatible surfaces that are able to control the adhesion of specific proteins responsible for the development of neurodegenerative diseases such as Creutzfeldt–Jakob, Alzheimer, Parkinson and Lewis body disease. Our approach was focused on problems prior to the detection …
Plasma treatment of polymers for biomedical applications
Vascular grafts made of polyethyleneterephthalate (PET) polymers have successfully replaced large-diameter blood vessels, but the long-term performance of small-diameter (< 6 mm) vascular grafts is still disappointing. The main problem is insufficient biocompatibility of polymer surface with blood, which causes complications after implementation; such as thrombosis or restenosis. These complications …
Measuring the probability for heterogenous recombination of hydrogen and oxygen atoms on surfaces of fusion relevant materials
This thesis presents studies of probability of heterogeneous recombination of oxygen and hydrogen atoms on surfaces of different types of carbon-based materials. The probability of heterogenous recombination is described with a quantity called recombination coefficient, which is defined as the probability that an atom which impinges upon a solid surface …
Plasma sterilization of microorganisms
The sterilization efficiency of oxygen plasma was studied. Plasma was created in pure oxygen with an inductively coupled radiofrequency discharge. The discharge power was estimated to about 180 W. Plasma parameters were measured with a double Langmuir probe and a catalytic probe. Plasma parameters depended on pressure in the discharge …
Analysis of bacteria damages caused by treatment with oxygen plasma particles
The possible mechanisms for destruction of two types of bacteria with oxygen radicals were studied. Samples consisting of standard ATCC strains of Gram – positive bacteria Staphylococcus aureus and Gram – negative bacteria Escherichia coli were obtained. Bacteria were cultivated according to the standard procedures and fixed on substrates of …