REPOSITORY > LATEST

Dielectric materials are essential components of electronic devices and electric power systems. Consequently, the design and development of new materials with enhanced dielectric response remain of great importance. This dissertation examines three different approaches to enhancing the dielectric response: (i) percolative composites, (ii) polymer blending, and (iii) the induction of …

Ferroelectric materials have the ability to convert electrical energy into mechanical energy and vice versa, which makes them widely used as sensors, actuators, and ultrasonic transducers. While their electrical and electromechanical properties are well studied, mechanical properties like Young’s modulus (E) and hardness (H) remain known to a lesser extent. …

Environmental contamination by toxic metals—such as Pb²⁺, Cr³⁺, and Hg²⁺—and organometallic species like monomethylmercury (MeHg) presents one of the most persistent global challenges due to their bioaccumulation, long-term toxicity, and resistance to degradation. This thesis addresses this critical issue through a multidisciplinary approach combining nanotechnology, environmental chemistry, biosensor engineering, and …

Fluorine, though abundant on Earth, is not readily available in a form suitable for organic synthesis. While fluoride salts like fluorite exist, they have limited reactivity due to solubility properties. Converting fluorite to hydrofluoric acid (HF) or fluorine gas (F2) increases reactivity but introduces significant safety concerns due to the …

Fabrication of electroceramics usually requires high sintering temperatures of 800 to 1400 °C, which can unintentionally lead to problems such as volatilization of species, formation of secondary phases and excessive grain growth. These problems can cause inhomogeneous microstructures, non-stoichiometric chemical compositions and limited material functionality. Therefore, there is a need …

Hydrogen is a promising energy carrier in the emerging green energy landscape. It is environmentally friendly, transportable, and storable. The Solid Oxide Cell (SOC) system is a complex technology that enables the bidirectional conversion of hydrogen to energy. The label SOC entails solid oxide fuel cell (SOFC) systems, which produce …

Permanent magnets are vital parts of various devices, above all, those which are essential for the transition to a green society. However, they are made of materials, including rare-earth elements, for which unlimited availability cannot be taken for granted. Therefore, it is desirable to reduce the content of these materials …

In the scope of this thesis, I focused on SrTiO3 (ST)-based dielectric ceramic composites as a lead-free perovskite material, which holds great potential for use in various electronic components. Such materials are large-scale and fabricated under high energy requirements, indicating an increasing need for a more environmentally friendly processing method. …

One of commonly used analytical technique for direct elemental analysis of solid samples is Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Although widely used for the analysis of various samples, obtaining accurate quantitative results remains a major challenge as matrix-matched standards are required. The aim of this thesis was …

In the field of biomedical materials, conventional approaches to tissue engineering and wound healing face limitations that encourage the exploration of innovative treatments. This work presents multifaceted exploration of piezoelectric polylactic acid (PLA) films intended for biomedical applications, from the optimization of the conditions for efficient film preparation to the …