Views: 0 | Downloads: 0
Bulk molding compound (BMC) composites are short fiber reinforced polymer
matrix composites, predominantly used for the mass production of complex shaped components in
electro, automotive and appliance industry. Despite the advantages of high specific strength
and design flexibility as compared to metals , the manufacturing of polymer matrix
composites on industrial scale suffers the problems of reproducibility. E nvironmental issues,
related to styrene emissions du ring manufacturing and waste management of end of life
composites also need to be considered .
Mechanical, viscoelastic and thermal properties of BMC composites are influenced by
the orientation and distribution of fibers in the microstructure. The latter is formed during
the molding process and depends on the composition, molding conditions and on the
geometry of the mold cavity. Thus, a molded BMC product can exhibit a high
microstructural variation, resulting in random and regular or non uniform, cluster ed
microstructural patterns. In th e T hesis, we address and discuss the relation between the
microstructure, mechanical and thermal properties of BMC composites with different
weight fractions of electric (E) glass fibers (EGFs), i.e. from 0 wt% to 35 wt%.
The Voronoi tessellation method , radial distribution functions (RDFs), stereological
analysis and derived statistical descriptors are used to quantitatively describe the
microstructures of BMC composites with dif ferent fiber fractions (5 wt% 20 wt%). The
experimental microstructures were obtained perpendicular on the filling flow direction, i.e.,
in cross section. They were compared to the modeled microstructures with random fiber
distribution, i n order to distinguish between different microstructural patt erns and to
describe the level of microstructural uniformity. We show that the highest level of
microstructural uniformity is obtained in the composite with 7.5 wt% of fibers and it
decreases either with lower or progressively higher glass fiber content . The latter composite
has the best coincidence of the experimental and model l ed Voronoi area size distribution s
and RDF , as well as the lowest calculated homogeneity parameter, 𝐻𝑃𝐴 (0.68) and the
smallest extent of local disorder (~40 µ m).
The flexural strength of BMC composites reaches the peak values at EGF content
between 10 wt% and 15 wt%, 110 ± 8 MPa and 12 1 ± 16 MPa , respectively, and at lower
or higher EGF fractions the flexural strength is much lower. The maximum flexural
strength is attributed t o a combined effect of an optimum fiber content and fiber
distribution uniformity, while a decrease in the flexural strength at EGF contents exceeding
15 wt% is a consequence of progressively pronounced microstructural disorder. T he
reinforcing effect of f ibers is the highest in the composite with 15 wt% of EGFs, as
confirmed by the lowest value of the coefficient of reinforcement 𝐶 (0.79).
Thermal conductivity of BMC composites decrease
s with increasing EGF weight
content from 0.960 W/mK to 0.771 W/mK for the composite s containing 0 wt% and
35 wt% of fibers , which suggests that it is to a large extent influenced by the fraction of
EGFs, and not or only slightly by their distribution in the microstructure.
Our results demonstrate that the optimal BMC material composition for a certain
application is a compromise between the high level of microstructural uniformity and
suitable mechanical and thermal properties. Furthermore, the quantitative microstructural
anal ysis is found to be a reliable support in the product design and in the manufacturing
process of BMC parts on an industrial scale