Views: 0 | Downloads: 0
The main topic of the doctoral thesis are nanoporous materials for long-term heat
storage. Microporous aluminophosphates are very appropriate for such an application,
because their frameworks are able to absorb large amounts of water in a very narrow
relative pressure range. Firstly, I focused on AlPO4-34 that was previously characterized
with a very high heat-storage capacity (472 kWh/m3). With the combination of nuclear
magnetic resonance, X-ray diffraction and first-principles calculations, I was able to
describe the mechanism of dehydration in AlPO4-34 at an atomic level. Water molecules
that were adsorbed first played an important role for the formation of the steep water
sorption isotherm, whereas heat-storage capacity was dictated by the cage dimensions.
Equipped with novel insights, I started a study of another aluminophosphate that was
expected to have even better characteristics for the heat-storage applications. With the
help of co-workers from the Department of Inorganic Chemistry and Technology at the
National Institute of Chemistry I managed to prepare microporous aluminophosphate
AlPO4-LTA. It was long believed that AlPO4-LTA framework becomes unstable after the
removal of the structure-directing molecules, which are trapped inside the cages after the
synthesis. I realized that this was not the case and revealed the reason that misled other
researchers. I thoroughly studied the material by applying nuclear magnetic resonance
and discovered that the framework has a great tendency to deform. Once calcined, the
framework becomes extremely hydrophilic. It quickly absorbs water and deforms. The
deformations are not ordered on the long range and therefore X-ray diffraction peaks are
broadened. Such broadening of diffraction peaks is more common for materials with
collapsed frameworks and with a partially amorphous nature. With AlPO4-LTA this is
not the case. Its framework appears hydrothermally very stable and hydrationdehydration
processes are completely reversible with almost no heat-storage capacity loss
after 40 cycles. Furthermore, in a comparative study I concluded that AlPO4-LTA is
possibly the most promising candidate for heat-storage applications among all the tested
materials so far. It has a high heat-storage capacity (527 kWh/m3) and requires a 10–
15 °C lower temperature for regeneration. Metal-organic frameworks are another
promising group of nanoporous materials that could be utilized in different applications.
Their main advantages over other porous materials are a wide selection of building units
(organic linkers and metal centers), a large variety of framework structures and a
relatively simple synthesis procedure. Unfortunately, these materials often lack
hydrothermal stability, have less steep water sorption isotherms and/or start to absorb
water at unsuitable relative pressure. We can overcome these issues by mixing different
linkers in the same framework. Confirmation of a successful incorporation of different
linkers as well as determination of their distribution along the crystal is very important.
And since there was no appropriate method for inspection of the linker distribution, I
developed one that is based on the measurement of the rate of polarization transfer
between protons of different linkers. The performance of the approach was demonstrated
on ML-DUT-5, in which the two linkers were shown to be homogeneously dispersed.
Distribution analysis with this new method was fast and simple.